Geneve logical memory map
The logical address map determines which devices or memory areas appear in the logical address space. These are the addresses as seen from the CPU or the program that is run, but they need not correspond to the same physical address at all times. The correspondence is provided by the mapper.
Native mode
The native mode is also called MDOS mode. It is the mode which the Geneve initially boots to, typically with white letters on dark blue, and 80 column display.
| 0000 | Reserved | Operating system |
|---|---|---|
| 0400 | Free space | Onboard memory or expansion |
| 2000 | ||
| 4000 | ||
| 6000 | ||
| 8000 | ||
| A000 | ||
| C000 | ||
| E000 | ||
| F000 | On-chip memory | Hides mapped page |
| F100 | Video ports | |
| F108 | Keyboard | |
| F110 | Mapper | See link |
| F120 | Sound chip | |
| F130 | Clock chip | |
| F140 | Free space | Onboard memory or expansion |
| F800 | ||
| FFF8 | ||
| FFFA | Decrementer | |
| FFFC | NMI vector | |
| FFFE |
GPL mode
The GPL mode is the compatibility mode, which is provided to run TI-99/4A programs.
| 0000 | GPL interpreter | Operating system |
|---|---|---|
| 2000 | Free space 8 KiB | Onboard memory or expansion |
| 3000 | ||
| 3FFE | ||
| 4000 | DSR space | Normally used by the GeneveOS DSR |
| 6000 | Cartridge ROM contents | Loaded from disk |
| 8000 | Mapper | See link |
| 8008 | Keyboard | |
| 8010 | Clock chip | |
| 8020 | Free space | Also includes the "PAD RAM" (16-bit RAM of the TI-99/4A) |
| 8300 | Here, its speed depends on SRAM or DRAM mapping | |
| 8400 | Sound chip | |
| 8600 | External bus | Any device in the PEB that maps to this address |
| 8800 | Video ports | |
| 9000 | Speech synthesizer | if plugged into the PEB |
| 9800 | GRAM | |
| A000 | Free space 24 KiB | |
| C000 | ||
| E000 | ||
| F000 | On-chip memory | Hides mapped page |
| F100 | Free space | |
| FFFA | Decrementer | |
| FFFC | NMI vector | |
| FFFE |